About this tool
Every video file is a river of bits, and its size is exactly the width of that river times how long it flows: file size = (video bitrate + audio bitrate) × length ÷ 8. Bitrate is measured in megabits per second (Mbps), and dividing by 8 converts bits to bytes — that single division is the whole secret, and it is also why so many creators are surprised. A '1080p' export is not one size: at YouTube's recommended 16 Mbps it runs about 120 MB a minute, while a heavily compressed 8 Mbps export of the same footage runs 60 MB a minute, and a 4K export at 45 Mbps runs about 340 MB a minute. Same resolution, same length, three wildly different files — the bitrate is the number that decides.
The worked example is the video every creator exports: 10 minutes at 1080p, 16 Mbps video plus 192 kbps audio. The total bitrate is 16.192 Mbps; times 600 seconds, divided by 8, gives 1,214 MB — about 1.2 GB. At a 25 Mbps upload speed that takes roughly 6.5 minutes to reach YouTube. The reverse calculation is just as useful: with a 500 MB limit for the same 10 minutes, the maximum video bitrate is about 6.5 Mbps — export above that and the platform will reject or re-compress your file. The common mistakes are all unit mistakes: confusing MB (megabytes, file size) with Mb (megabits, speed) and expecting a 1,200 MB file to upload in seconds on a '100 Mbps' connection (100 megabits is only 12.5 megabytes a second); forgetting the audio bitrate entirely; and trusting an editor's '1080p' preset without checking its bitrate — presets vary by a factor of three between editors, so the preset name tells you almost nothing about the file you will get.
How to use it
- Set your video's length in minutes.
- Pick the quality preset that matches your export — or choose Custom and type the bitrate your editor actually used.
- Add your audio bitrate (192 kbps is the honest default for most videos).
- Press Calculate: read the file size, the upload time, and — if you entered a size limit — the maximum bitrate that fits.
Tips from real creator workflows
- Check your editor's real export bitrate, not the preset name — '1080p' can mean 8 Mbps in one editor and 16 Mbps in another.
- A 10-minute 1080p video at 16 Mbps is about 1.2 GB — budget that into your upload schedule before a deadline.
- Uploading 4K when most of your audience watches on phones buys you a 3× file for a difference almost nobody sees.
- If a platform caps uploads at 500 MB, use the reverse calculation first — it tells you the bitrate ceiling before you export.
Frequently asked questions
Why is my export bigger than the calculator says?
Usually the editor's actual bitrate is higher than the preset you picked — check the exported file's properties and re-run with that number. Container overhead adds under 1%, so a large gap always means the bitrate was different.
What is the difference between MB and Mb?
MB is megabytes (file size); Mb is megabits (speed). One byte is 8 bits, so a 100 Mbps connection moves 12.5 MB a second. The calculator handles the conversion for you.
Does the calculator work for Shorts?
Yes — pick the Shorts 1080p preset (12 Mbps). A 60-second Short at that rate is about 91 MB, which is why Shorts uploads feel instant next to a long video.
Guides that use this tool
Related tools
Green Screen Background Remover
Key out a green screen — or any solid colour — from a photo in your browser: adjustable similarity and edge softness, transparent PNG out.
Video Compressor
Compress a video right in your browser — smaller file, same watchable quality, nothing uploaded anywhere.
Video Trimmer & Clip Cutter
Cut the exact seconds you need out of any video — in your browser, frame-accurate, no upload, no watermark.